Heatsink Plasters Thermal Silicone Cooling Paste Strong N3I4. Glue Z2E4

Description

Description
Description&Preview
shipping&policy
Description:
product description
Product parameters:
Melting capacity: 0 (200C/24Hours)
Evaporation capacity: o.001% (200C/24Hours)
Thermal conductivity: 0.671W/m-K
Thermal impedance: 0.06
Setting time: 3min (25℃)
Bonding strength: 25Kg
Insulation factor5.1
Dissipation coefficient0.005
Independent vacuum packaging
Scope of application:
It has a high-strength, fast-speed bonding effect, and is suitable for various components that need to be directly bonded firmly, LEDs and heat sinks, etc.
1. Used as a heat transfer medium for electronic components.
2. Computer CPU, GPU (graphics card chip) and radiator gap filling and heat conduction.
3. The filling of the gap between the high-power transistor and the aluminum and copper substrates.
4. The filling of the gap where the silicon controlled element diode contacts the aluminum and copper substrates.
5. Reduce the working temperature of various heating elements, etc.
Product performance:
Good thermal conductivity, strong adhesion. Vacuum package is not easy to oxidize and dry out. Good viscosity. Short drying time. Good performance. Various chips are recommended for heat dissipation.
It is a one-component room temperature vulcanized silica gel with good thermal conductivity and insulation. The product has good conductivity and a wide temperature range (-60200℃).
It can withstand high temperature of 300℃ in a short time. In addition, it has short surface curing time, strong adhesion, long storage period, non-toxic, solvent-free, and can be safely used in the elastic bonding, heat dissipation, insulation and packaging of electronics, electrical appliances, instrumentation, LED, heat sink and other industries.
Instructions:
1. When using, directly squeeze out the product, rub it with the surface of the adherend, and cover it immediately after use, in case it is tried again;
2. The surface fixation speed is related to the relative humidity and temperature in the air; the higher the temperature, the faster the curing speed, and vice versa;
3. Recommended coating thickness: 0.1-0.5mm, the thinner the better.
4. Please clean the surface of the bonded object with solvent (such as alcohol) before use. Do not use detergent to clean it. Do not apply it until the surface is clean.
Packing specification: 5g/piece (packing has good air tightness, and the outer vacuum bag isolates the air, which increases the storage time).
Package Includes:
1x Heatsink Plaster
Preview:
Thank you for your purchase
Problems?
You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions:
Shipping
● We will arrange shipping for you within 24 Hours after payment cleared except the holidays.
● We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost.
Payments
We accepts Paypal only If you have any questions about the payment,please contact us through eBay message.
Import Duties
In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.
Terms & Conditions
By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding.
All pictures are for illustration purpose only and Colours may vary slightly.
Our store obeys all eBay Rules and Policies.
Returns Policy
To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it.
Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging.
All shipping and handing charges are non-refundable
Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items.
Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.